Synchronise
CCTV Systems using atomic clocks.
click
here for product list
The time
signal transmitted by the National Physics Laboratory is the most precise
time available, accurate to 1 second in 1,000,000 years. The Galleon range
of Atomic Clocks uses the signal to synchronise the time recorded on video
surveillance equipment. Galleon Atomic Clocks can synchronise the time
on video sequencers, Digital Multiplexers, CCTV system or directly onto
the video signal before recording. The signal can be received up to 1500
kilometres from either Rugby in the UK or Frankfurt in Germany.
Simple
Connections.
Simple connections.
Galleon Atomic Clocks are easy to install and use. They interface with
either-
- Video
Sequencer/Multiplexer serial port and have driver software to set the
time on most video sequencers and multiplexers.
- Stamp
the time directly into the signal before the VCR, this uses a coax in
line time stamp
All kind
of organisations all over the world are already using Galleon Remote Atomic
Radio Clocks.
Key benefits
include:
- Ensures
that the correct time is always recorded on tape.
- Automatically
adjusts between Summer/Winter Time. No need to remember to change your
clocks manually.
- Helps
combat fraud by providing accurate audit-able time-stamping
- Log exactly
when events occur.
- Set the
correct audit-able time on CCTV recorder.
- Full product
range, for all your Time Synchronisation requirements from Galleon The
Time Specialists.
- Automatic
update of time. No user intervention required, once installed forget
about it.
- Simple
Installation
- Reliable,
GALLEON Atomic Clocks are used by thousands of organisations world-wide.
They are used in a wide range of applications, including currency trading
and e-commerce.
Product
List : CCTV Time Synchronisation using ARC (Atomic Radio Time)
|
|
Stamp
the correct synchronised time onto a single VCR or monitor.
|
|
Description
|
Product
Code
|
|
Video
TimeStamper master. The TimeStamper for CCTV provides an on-screen
time and date display for CCTV systems and is connected in-line
just before the monitor or VCR. Works with coax systems. Includes
Atomic radio time receiver, VCR coax interface (input and output),
and a display for time, signal strength and date.
|
TSM/M
|
| Remote
Antenna for TimeStamper Master. The remote antenna adds the ability
to mount a receiving antenna up to 500 feet 150 meters away from a
TimeStamp master to improve the signal reception in areas were there
is a weak radio signal. The remote antenna m can be mounted in a roof
space or on a external wall. Unit is sealed to IP65. |
TAD/RTA/M
|
Video
TimeStamper slave. The TimeStamper slave receives the time
from a TimeStamper master thus saving the cost of a second Atomic
radio Clock receiver. TimeStamper slave provides an on-screen
time and date display for CCTV systems and is connected in-line
just before the monitor or VCR and works with coax systems.
|
TSS/M
|
|
Synchronise
time on CCTV Multiplexers
Tecton
(Drax)TimeController Synchronises the time on Tecton, Montage or
Vicon multiplexers. The TimeController provides a serial output
to synchronise the CCTV multiplexer once every hour, Includes Atomic
radio time receiver mains powered, serial interface, time, signal
strength and date display.
|
|
|
MontageTimeController
Synchronises the time on Tecton, Montage or Vicon multiplexers.
The TimeController provides a serial output to synchronise the
CCTV multiplexer once every hour, Includes Atomic radio time receiver
mains powered, serial interface, time, signal strength and date
display.
|
MUX/DTM/M
|
| ViconTimeController
Synchronises the time on Tecton, Montage or Vicon multiplexers.
The TimeController provides a serial output to synchronise the CCTV
multiplexer once every hour, Includes Atomic radio time receiver mains
powered, serial interface, time, signal strength and date display.
|
MUX/DTM/M
|
| BaxallTimeController
Synchronises the time on Baxall multiplexers. The TimeController
provides a serial output to synchronise the CCTV multiplexer once
every hour, Includes Atomic radio time receiver mains powered, serial
interface, time, signal strength and date display. |
MUX/DTM/M
|
| Remote
Antenna for Time Controller. The remote antenna adds the ability
to mount a receiving antenna up to 500 feet 150 meters away from a
TimeStamp master to improve the signal reception in areas were there
is a weak radio signal. The remote antenna m can be mounted in a roof
space or on a external wall. Unit is sealed to IP65. |
TAD/RTA/M
|
|
| Best seller |
 |
A complete solution for synchronising the time across computer networks.
|
| Popular Product |
A Network timeserver using GPS signal to synchronise computer networks
|
| Popular Product |
used alongside a Galleon timeserver to provide accurate time
|
| Popular Product |
GPS clock providing time synchronisation for computer systems
|
|