|
Synchronise CCTV Systems using atomic radio-controlled clocks.
click here for product list
|
The time signal transmitted by the National Physics Laboratory is the most precise time available, accurate to 1 second in 1,000,000
years. The Galleon range of Atomic Radio Clocks uses the signal to synchronise the time recorded on video surveillance equipment. Galleon
ARC-Clocks can synchronise the time on video sequencers, Digital Multiplexers, CCTV system or directly onto the video signal before
recording. The signal can be received up to 1500 kilometres from either Rugby in the UK or Frankfurt in Germany. |
Simple Connections
Simple connections. Galleon Atomic Radio Clocks are easy to install and use. They interface with either:-
- Video Sequencer/Multiplexer serial port and have driver software to set the time on most video sequencers and multiplexers.
- Stamp the time directly into the signal before the VCR, this uses a coax in line time stamp
All kind of organisations all over the world are already using Galleon Remote Atomic Radio Clocks, more than 20,000 ARC-Clocks world-wide
Key benefits include:
- Ensures that the correct time is always recorded on tape.
- Automatically adjusts between Summer/Winter Time. No need to remember to change your clocks manually.
- Helps combat fraud by providing accurate audit-able time-stamping
- Log exactly when events occur.
- Set the correct audit-able time on CCTV recorder.
- Over 20,000 GALLEON Atomic Radio Clocks installed and working.
- Full product range, for all your Time Synchronisation requirements from Galleon The Time Specialists.
- Automatic update of time. No user intervention required, once installed forget about it.
- Simple Installation
- Reliable, GALLEON Atomic Clocks are used by thousands of organisations world-wide. They are used in a wide range of applications, including
currency trading and e-commerce.
Product List : CCTV Time Synchronisation using ARC (Atomic Radio Time)
Stamp the correct synchronised time onto a single VCR or monitor.
Description |
Product Code |
Video TimeStamper master. The TimeStamper for CCTV provides an on-screen time and date display for CCTV systems and is connected in-line
just before the monitor or VCR. Works with coax systems. Includes Atomic radio time receiver, VCR coax interface (input and output), and a
display for time, signal strength and date. |
TSM/M |
Remote Antenna for TimeStamper Master. The remote antenna adds the ability to mount a receiving antenna up to 500 feet 150
meters away from a TimeStamp master to improve the signal reception in areas were there is a weak radio signal. The remote antenna m can be
mounted in a roof space or on a external wall. Unit is sealed to IP65. |
TAD/RTA/M |
Video TimeStamper slave. The TimeStamper slave receives the time from a TimeStamper master thus saving the cost of a second Atomic
radio Clock receiver. TimeStamper slave provides an on-screen time and date display for CCTV systems and is connected in-line just before
the monitor or VCR and works with coax systems. |
TSS/M |
Synchronise time on CCTV Multiplexers
Description |
Product Code |
Tecton (Drax)TimeController Synchronises the time on Tecton, Montage or Vicon multiplexers. The TimeController provides a serial output
to synchronise the CCTV multiplexer once every hour, Includes Atomic radio time receiver mains powered, serial interface, time, signal
strength and date display. |
MUX/DTM/M |
MontageTimeController Synchronises the time on Tecton, Montage or Vicon multiplexers. The TimeController provides a serial output
to synchronise the CCTV multiplexer once every hour, Includes Atomic radio time receiver mains powered, serial interface, time, signal
strength and date display. |
MUX/DTM/M |
ViconTimeController Synchronises the time on Tecton, Montage or Vicon multiplexers. The TimeController provides a serial output to
synchronise the CCTV multiplexer once every hour, Includes Atomic radio time receiver mains powered, serial interface, time, signal strength
and date display. |
MUX/DTM/M |
BaxallTimeController Synchronises the time on Baxall multiplexers. The TimeController provides a serial output to synchronise the
CCTV multiplexer once every hour, Includes Atomic radio time receiver mains powered, serial interface, time, signal strength and date
display. |
MUX/DTM/M |
Remote Antenna for Time Controller. The remote antenna adds the ability to mount a receiving antenna up to 500 feet 150 meters
away from a TimeStamp master to improve the signal reception in areas were there is a weak radio signal. The remote antenna m can be mounted
in a roof space or on a external wall. Unit is sealed to IP65. |
TAD/RTA/M |
All prices are ex-works and exclude VAT - Delivery Charge of £10.00 per item.
|
| Best seller |
 |
A complete solution for synchronising the time across computer networks.
|
| Popular Product |
A Network timeserver using GPS signal to synchronise computer networks
|
| Popular Product |
used alongside a Galleon timeserver to provide accurate time
|
| Popular Product |
GPS clock providing time synchronisation for computer systems
|
|
Home
